RK Rose+Krieger RK MonoLine R Montageanleitung Seite 113

6 Maintenance and troubleshooting
6.1 Safety information relating to maintenance and troubleshooting
Improperly performed maintenance
and troubleshooting
6.2 Maintenance plan
Maintenance intervals
Linear unit RK MonoLine R/RK MonoLine Z/RK MonoLine Z corrosion-protected
27.10.2023
WARNING!
Risk of injury due to improperly performed
maintenance and troubleshooting work!
Improper maintenance and troubleshooting work
can lead to injury and property damage.
– Before starting work, ensure that there is suffi-
cient space for assembly.
– Ensure that the assembly site is kept clean and
tidy at all times! Components and tools lying
around or on top of one another are sources of
accidents.
– If components have been removed, ensure that
they are assembled correctly, reinstall all the
fixing elements and adhere to the screw tight-
ening torques.
– Observe the following before re-commis-
sioning:
– Ensure that all maintenance and trouble-
shooting work has been performed and
completed according to the specifications
and information in this manual.
– Ensure that nobody is still in the danger
zone.
The following sections describe the maintenance work necessary
for optimum, faultless operation of the linear unit.
If increased wear is noticeable during regular inspections, shorten
the required maintenance intervals according to the actual signs of
wear.
If you have any questions about the maintenance work and inter-
vals, contact the manufacturer
Maintain components provided by the operator regularly according
to the specifications provided by the respective manufacturers.
Maintenance and troubleshooting
Maintenance plan
Ä Page 74.
113