Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10 Technical data
Pin assignment,
circuit diagram
Supply voltage
!
!
Power consumption
Capacity of battery
Installation conditions
Ambient temperature range
Storage temperature
Degree of protection
Electromagnetic compatibility
Medium temperature range
Operating pressure range
88
10.3
Inputs and outputs
See "Quick wiring guide" on Page 58.
10.4
Power supply
Sampler: internal 12 V
, 12 Ah lead gel battery
DC
Note!
The sampler cannot be operated without the battery. The battery must be installed for operation.
Charger for Liquiport 2000 Ex:
Standard IP20
230 V
Wide range IP30
110 V
Note!
The unit can only be charged outside Ex-areas. In the case of Liquiport 2000 Ex, you must remove
the battery for connecting to the charger.
Max. 29 W
94 hours (at a sampling interval of 15 minutes, a sampling volume of 100 ml and a suction height
of 4 metres)
376 samples
=
10.5
Operating conditions
See "Installation" on Page 56.
10.6
Environment
0 °C to +40 °C
Do not expose the device to high fluctuations in temperature and direct sunlight!
-20 °C to +60 °C
Sampler: IP65
Charger: standard: IP20
Option: IP54
To EN 61326
10.7
Process
0 to +50°C
No pressure
; charge current 2.7 A
AC
to 230 V
; charge current 2.0 A
AC
AC
Liquiport 2000 Ex
Endress+Hauser
Werbung
