Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Liquiport 2000 Ex
Sample distribution
Sample preservation
Dosing volume
Dosing accuracy
Conveying velocity
Conveying height
Conveying distance
Endress+Hauser
Time proportional:
A constant sample volume is taken at constant
time intervals.
Quantity proportional:
A constant sample volume is taken at variable
time intervals.
Flow proportional:
A variable sample volume is taken at the same
time intervals.
The sampling liquid is distributed into the individual bottles by means of a rotating distributing pipe.
In addition to a 20 litre PE composite container, various bottle distributions are available:
The distribution version can be replaced easily without the need for tools. The Liquiport 2000
allows flexible configuration of the sample distribution. Individual bottles and bottle groups can be
freely defined for the main, switching and event programmes.
The sample bottles are located in the lower compartment of the sampler. They can be cooled with
chip ice. The lower sampler compartment can be sealed with a lid and transported separately from
the upper sampler section.
1 x 20 ltr. PE
1 x 5 ltr. glass
10.2
Dosing unit
20 to 9999 ml can be set at the controls
± 5 ml or ± 5 % of the set volume
> 0.5 m/s, to EN 25667
6 metres; 8 metres (optional)
30 metres
Flow curve
Time based
Flow based
Flow / time based
24 x 1 ltr. PE
12 x 2 ltr. PE
8 x 1.8 ltr. glass
12 x 0.7 ltr. glass
10 Technical data
Q
t
Q
t
Q
t
Q
t
12 x 1 ltr. + 6 x 2 ltr. PE
87
Werbung
