Endress+Hauser Liquiport 2000 Ex Bedienungsanleitung Seite 77

Liquiport 2000 Ex
Switch (only for an
active switching pro-
gramme)
Creating programmes - Main programmes
Sample
Distribution
Start programme
Stop programme
Mode
Synchronisation
Creating programmes - Switching programmes
Switch
Sample
Endress+Hauser
↵
Set Day:
↵
Programme selection Switch between main and switching programmes on two specific times
Switch a day.
Week:
Switch between main and switching programmes on three specific
weekdays.
Q greater:
Switch when flow greater than limit value.
Q smaller:
Switch when flow smaller than limit value.
External:
Switch on external signal.
↵
Set Time:
↵
Creating programmes Sampling acc. to time;
↵
Programme 1,2,3,4 Quantity:
↵
Sample Sampling acc. to volume (connect volume signal!).
Mode Ext. sig.:
Sampling on external signal (connect signal input!).
Flow
Sampling acc. to flow (connect volume signal).
↵
Set Time:
↵
Creating programmes Bottle change after a specific time.
↵
Programme 1,2,3,4 Number:
↵
Distribution Bottle change after a specific number of samples.
Sample Ext. sig.:
Bottle change on external signal (connect signal input!).
↵
Set Aut:
↵
Creating programmes Press the Aut key to start the programme.
↵
Programme 1,2,3,4 Time:
Start-Stop Start the programme at a settable time.
↵
Set Prog. end:
↵
Creating programmes Programme end on completion of the set programme.
↵
Programme 1,2,3,4 Time:
Start-Stop Programme end after settable time.
None:
Continuous operation.
↵
Set Cont.:
↵
Creating programmes Continuous operation.
↵
Programme 1,2,3,4 Day:
Start-Stop Operation at 2 settable times per day.
Week:
Operation on 3 settable days per week.
Interval:
Settable operating duration in settable intervals.
↵
Set Aut-button
↵
Creating programmes Time:
↵
Programme 1,2,3,4 Sampling times and bottle change are synchronised.
Synchronisation Time+bot.:
Synchronisation of sampling and distribution. Fixed times are assigned
to the bottles.
↵
Set Sample: sampling type in the switching programme.
↵
Creating programmes Distribution: distribution mode for the switching programme.
Switch 1,2
↵
Set Time: sampling acc. to time.
↵
Creating programmes Volume: sampling acc. to volume (connect volume signal!).
↵
Switch 1,2 Ext. sig.: sampling on external signal (connect signal input!).
Sample Flow: sampling proportional to flow (connect quantity signal)
6 Commissioning
Day
Time
Time
Aut
Prog. end
Cont.
Aut-button
-
Time
77