Endress+Hauser Liquiport 2000 Ex Bedienungsanleitung Seite 78

6 Commissioning
Distribution
Creating programmes - Event programme
Event prog.
Sample
Distribution
Switch
Service
Service
78
↵
Set Time:
↵
Creating programmes Bottle change after a specific time.
↵
Switch 1,2 Number:
Distribution Bottle change after a specific number of samples.
Ext. sig.:
Bottle change on external signal (connect signal input!).
↵
Set Sample:
↵
Creating programmes Sampling type in the event programme.
Event prog. Distribution:
Distribution mode for the event programme.
↵
Set Time:
↵
Creating programmes Sampling acc. to time
Event prog. Quantity:
↵
Sample Sampling acc. to volume (connect volume signal!).
mode Ext. sig.:
Sampling on external signal (connect signal input!).
Flow:
Sampling acc. to flow (connect volume signal).
Once:
Single sample.
↵
Set Time:
↵
Creating programmes Bottle change after a specific time.
↵
Event prog. Number:
↵
Distribution Bottle change after a specific number of samples.
mode Ext. sig.:
Bottle change on external signal (connect signal input!).
↵
Set No change
↵
Creating programmes Change:
↵
Event prog. Bottle change for event sample.
↵
Distribution 1-x bottles:
Switch
↵
Set General:
Service Software name, software version, software option, CPU number, pre-
set, view angle setting (contrast)
Run times:
Test: Service code necessary!!
Calibration: Calibration of the tap and the sample volume
Pump maintenance: Pump operation for changing the pump hose
– Run time - tube: operational time of the hose pump since the last
– Run time - limit: when the set operating time is reached, the warn-
reset;
ing 'CHANGE HOSE' appears on the display
Liquiport 2000 Ex
Time
-
Time
Time
No change
-
Endress+Hauser