Liquiport 2000 Ex
Endress+Hauser
6.4.3
Configuring the outputs
Menu structure:
Fig. 18:
Outputs menu structure
Power down
The output contact is switched on a power failure.
Sample
The output contact is switched on a sample.
Bottle
The output contact is switched on bottle replacement.
Ext. stop
The output contact is switched on an external stop.
Fill. end
The output contact is switched on exiting the sampling programme.
No flow
The output contact is switched if the device was unable to draw in any sampling
medium (e.g. blocked suction hose).
Error
Displays all error messages
Suction
Active during suction when sampling.
Overfill
The output contact is switched when a bottle is overfull.
6 Commissioning
69