Safety Guidelines - two trees TS2 Benutzerhandbuch

Safety guidelines

Warning: Laser engraving machine cannot directly carve or cut material that reflects the
light, may cause injury.
The product has a high engraving speed and is not recommended for industrial cutting.
And the laser head is a consumable.
Do not operate the laser head directly with your hands. Please wear goggles.
The laser diode is a sensitive component, please prevent static damage. (This product
has an electrostatic protection design, but there is still a possibility of damage.)
About your machine
1) X-axis Stepper Motor
2) Z-axis Stepper Motor
3) Laser Module
4) Control Box
5) Flash Buzzer
6) Emergency Stop Button
7) Z-axis Focusing Probe
8) X-axis Tensioner
9) Y-axis Stepper Motor
1) Y-axis Tensioner
2) X-axis Drag Chain
3) Y-axis Endstop/Limit Switch
4) Z-axis Manual Focusing Lifter Knob
5) X-axis Endstop/Limit Switch
6) Y-axis Drag Chain
7) Flame Detector Module
8) Y-axis lead rod
5