two trees TS2 Benutzerhandbuch Seite 25

Web user guide
1. On the touch screen, connect a Wi-Fi.
2. Click "Tools" on the main interface to enter the next interface.
3. Click "Wi-Fi" to enter the selection interface.
4. Select the Wi-Fi to be connected, enter the password, and click "Connect".
5. After the connection is successful, you will obtain an assigned IP address.
Tip: The obtained IP is used for WEB/APP connection. You can type the address into your
browser to enter the WEB control interface.
NOTE: The Wi-Fi used at the computer, or the screen must be the same. It is
recommended to use the mobile hotspot.
Move
Preview the position
Engrave
25
Drawing
Control Interface
Engrave Picture
Engrave File