Software-Installation - two trees TS2 Benutzerhandbuch

GRBL beginner's guide
1. Software downloading
LaserGRBL is one of the most popular DIY laser engraving software, which can be
downloaded in LaserGRBL website http://lasergrbl.com/download/ (the installation
package is also available on the TF card from the manufacturer or USB flash disk).
2. Software installation
Double click the software installation package to start the software installation and click
"Next" until the installation is complete.
3. Language
Click "Language" on the menu at the top to select the language you need.
4. Load Engraving File
Click "File" and "Open File" in turn, as shown in figure 8.1, and then select the graph you
want to engrave.
LaserGRBL supports files in the formats of NC, BMP, JPG, PNG, etc.
15