two trees TS2 Benutzerhandbuch Seite 4

Letter from TWOTREES
Dear consumers,
Thank you for choosing us.
It's customer-oriented idea, continuous innovation and pursuit of excellence that enable
very-body to have wonderful experience in using process. We believe that this manual
will be helpful. Hope you enjoy the good time with TwoTrees.
If you have any problems, please feel free to contact us via:
Website: www.twotrees3d.com
Facebook: https://www.facebook.com/group/twotrees3Dprinter
For general inquiry: info@twotrees3d.com
For technical support: service@twotrees3d.com
We will contact you within 24 hours.
Sincerely yours,
TwoTrees Team
Precautions
Please follow the instructions, due to misuse will be at your own risk.
1. Avoid looking steadily at the laser, which may damage your eyes.
2. Avoid touching directly during the machine working.
3. You can place a metal plate under the engraved or cut object to prevent your
table being burned through.
4. Avoid combustible object or gas.
5. Keep it away from children or pregnant women.
6. Do not take apart the laser without instructions.
7. Do not use it on material that reflects the light.
8. Wear goggles while taking off the laser cover.
9. Turn off the power when not use.
4