List Of Display Messages; List Of Error Codes - Knauer Smartline Pump 1000 Handbuch

List of Display Messages

The following list shows messages that may appear on the main screen
of the Smartline Pump 1000 and the pages of this manual on which they
are described.
SYSTEMTEST OK
Conflict with existing programs
Start Time Is Fixed
Delete this line? Confirm by cursor
Error signal was detected

List of Error Codes

Table 6 Error codes in GLP Menu
Error Code
5
9
10
12
13
23
33
34
35
Meaning
Motor failure
ERROR IN signal detected
Switch off due to exceeding maximum current
Switch off due to exceeding maximum pressure
Switch off due to falling below minimum pressure
Motor blocked
Calibrating values re-initialized
Calibrating curve re-initialized
Combination of error codes 33 and 34
43
9
13
22
33
33