Using The Arrow Keys In The Setup Menu - Knauer Smartline Pump 1000 Handbuch

Control of the Smartline Pump 1000
Fig. 8
SOP 2

Using the Arrow keys in the SETUP Menu

Load
Prog
Link
Links:
View (21 . . 29)
Hold 0
rhombus
Run 1
Example of a multi-page menu: VIEW menu
Menus without a rhombus
single page menus.
Entering Data
This SOP applies to the Smartline Pump 1000 Firmware Version 1.0X or
higher. Use this SOP for entering parameters and program steps in your
Smartline Pump 1000.
1. Place the cursor at the desired position of the main screen.
2. Press a numeric key to start data input. The appearance of the
cursor changes to a underscore character (see Fig. 6 on page 10).
3. Press the numeric keys to enter the desired numeric values.
Incorrect entries can be simply overwritten by continuing the entry.
4. Confirm the value by pressing any of the arrow keys. This finishes
data entry mode and moves the cursor to the next field according
to the arrow key direction.
5. You can modify and delete data according to SOP 15 "Modifying
and Deleting Programs" on page 24.
Fig. 9 "Structure of the SETUP Menu" on page 12 gives a complete
overview of the Setup Menu.
You can use the
You can use the
of parameters of any individual menu item.
Edit Prog Flow Pressure
Clear 0 [ml/min] [0.1 Mpa]
21 ___
___ ___
Time %A
[min]
in the lower left corner of the display are
arrow key for accessing menus.
and arrow keys for scrolling through the list
Events
off 0 on 1 2
Setup
___ ___ ___
___ ___ GLP
%B %C %D
11