General; Applications; Pumped Fluids; Technical Characteristics - DAB CP2-G Installations- Und Wartungsanleitungen

RESPONSIBILITY
The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that they may cause if they
have been tampered with, modified and/or run outside the recommended work range or in contrast with other indications given in
this manual.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors in copying. The
Manufacturer reserves the right to make any modifications to the products that it may consider necessary or useful, without affecting their
essential characteristics.
1.

GENERAL

The pumps in the IN LINE series represent a complete range of circulators. These installation and operating instructions describe the entire
range of models for the IN LINE series The specific type of model is indicated on the pack and on the product identification plate.

1.1 Applications

Indicated for booster sets for water systems of small, medium and large users. They can be used in the most varied fields, such as:
- Heating and conditioning systems
- Solar energy systems
2.

PUMPED FLUIDS

The machine has been designed and built for pumping water, free from explosive substances and solid particles or fibres, with a density of
1000 kg/m³ and a kinematic viscosity of 1 mm²/s, and chemically non-aggressive liquids. Use with other fluids is allowed only with the
manufacturer's authorization.
3.

TECHNICAL CHARACTERISTICS

All technical data are marked on the technical label on the pump. The various items are explained below (Fig. 1):
ENGLISH
Fig.1 Data plate
- Boiler supply
- Circulation systems
Pos.
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
11
Description
1 Description
2 Revision
3 Year
4 Week
5 Serial number
6 Maximum liquid temperature
7 Use
8 Rated flow
9 Maximum head
Minimum head
Insulation class
Degree of protection
Rated head
Rated voltage
Ampere
P1
P2 HP
P2 kW
Frequency
MEI Standard
Rated delivery diameter
Impeller diameter
MEI value
Rated number of revolutions
Logos
Pump code
MEI hydraulic efficiency