Particular Warnings - DAB CP2-G Installations- Und Wartungsanleitungen

KEY
The following symbols have been used in the discussion:
SITUATION OF GENERAL DANGER.
Failure to respect the following instructions may cause damage to persons and property.
SITUATION OF RISK OF ELECTRIC SHOCK.
Failure to respect the following instructions may cause a situation of serious danger for personal safety.
Notes and general information.
WARNINGS
Read this documentation carefully before installation.
Installation and operation must comply with the local safety regulations in force in the country in which the product is
installed. Everything must be done in a workmanlike manner.
Failure to respect the safety regulations not only causes risk to personal safety and damage to the equipment, but
invalidates every right to assistance under guarantee.
Skilled personnel
It is advisable that installation be carried out by competent, skilled personnel in possession of the technical qualifications
required by the specific legislation in force.
The term skilled personnel means persons whose training, experience and instruction, as well as their knowledge of the
respective standards and requirements for accident prevention and working conditions, have been approved by the person
in charge of plant safety, authorizing them to perform all the necessary activities, during which they are able to recognize
and avoid all dangers (Definition for technical personnel IEC 364).
The appliance may be used by children over 8 years old and by persons with reduced physical, sensory or mental
capacities, or who lack experience or knowledge, on condition that they are under supervision or after they have received
instructions concerning the safe use of the appliance and the understanding of the dangers involved. Children must not
play with the appliance. Cleaning and maintenance intended to be carried out by the user must not be performed by
children without supervision.
Overload protection. The pump is equipped with a thermal motor protector. If the motor overheats, the motor protector
switches the pump off automatically. The cooling time is about 15-20 min. after which the pump automatically switches on
again. After the motor protector has tripped, it is absolutely necessary to find the cause and eliminate it. See
Troubleshooting.
Use is allowed only if the electric system is in possession of safety precautions in accordance with the regulations in force
in the country where the product is installed (for Italy CEI64/2).
Failure to observe the warnings may create situations of risk for persons or property and will void the product guarantee.

Particular warnings

Always switch off the mains power supply before working on the electrical or mechanical part of the system. Only
firmly cabled mains connections are admissible. The appliance must be earthed (IEC 536 class 1, NEC and other applicable
standards).
Mains terminals and motor terminals may still have dangerous voltage when the motor is stopped.
The appliance may only be used for the functions for which it was designed.
Under certain calibration conditions, the converter can start automatically after a power failure.
ENGLISH
10