General; Applications - DAB esybox mini3 Installations- Und Wartungsanleitungen

The power supply cable must never be used to carry or shift the pump.
Never pull on the cable to detach the plug from the socket.
If the power cable is damaged, it must be replaced by the manufacturer or by their authorised technical assistance service, so
as to avoid any risk.
Failure to observe the warnings may create situations of risk for persons or property and will void the product guarantee.
RESPONSIBILITY
The Manufacturer does not vouch for correct operation of the electropumps or answer for any damage that they may
cause if they have been tampered with, modified and/or run outside the recommended work range or in contrast with
other indications given in this manual.
The Manufacturer declines all responsibility for possible errors in this instructions manual, if due to misprints or errors in copying. The Manufacturer
reserves the right to make any modifications to products that it may consider necessary or useful, without affecting their essential characteristics.

1. GENERAL

The product is an integrated system composed mainly of a self-priming multi-stage centrifugal electropump, an electronic circuit that controls it
and an expansion vessel. Cooling of the motor with water rather than air ensures less noise in the system.

1.1 Applications

Water systems supply and pressure boosting domestic use. On the
outside the product appears as a parallelepiped that presents 6 faces as
shown in Fig.1.
Face A: a door allows access to the Technical Compartment.
Inside the technical compartment you can access (see Fig.3):
Face B: A rubber cable gland allows the exit of the power cable to be connected to the power mains.
Face C: the 4 brass threads form the seat for the 4 support feet in the case of vertical installation. The two 1" screw caps can be removed to make
the connections towards the system, depending on the installation configuration you want to adopt. If applicable, connect to the connection marked
Figure 1
Figure 2
Figure 3
ENGLISH
1. Quick Guide;
2. Technical data plate;
3. Filling cap (only for vertical configuration);
4. Accessory tool;
5. Motor shaft;
6. QR-code
37