Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Functional check
Equipment
Emergency-stop push
button
Drill chuck guard
Date:
1.11
Personal protective equipment
For some works you need personnel protective equipment as protective equipment. These are
Safety helmet,
protective glasses or face guard,
protective gloves,
safety shoes with steel toe caps,
ear protection.
hairnet.
Before starting work make sure that the required personnel protective equipment is available at
the work place.
CAUTION!
Dirty or contaminated personnel protective equipment can cause illness.
Clean your personal protective equipment
after each use,
regularly once a week.
Personal protective equipment for special works
Protect your face and your eyes: Wear a safety helmet with facial protection when performing
work where your face and eyes are exposed to hazards.
Wear protective gloves when handling pieces with sharp edges.
Wearing of gloves during operation the drill is prohibited because of the danger of winding it up.
Wear safety shoes when you assemble, disassemble or transport heavy components.
1.12
Safety during operation
We provide information about the specific dangers when working with and on the geared drill in
the descriptions for these types of work.
WARNING!
Before switching on the geared drill make sure that there are
no dangers generated for persons,
no objects are damaged.
Avoid any unsafe work methods:
Make sure that your operation does not create a safety hazard.
The rules specified in these operating instructions must be observed during assembly,
operation, maintenance and repair.
Do not work on the geared drill if your concentration is reduced, for example, because you
are taking medication.
Safety
Version 1.0.1 - 2020-11-24
Check
After actuating the emergency stop push button the geared drill
must be switched off.
The geared drill can only be switched on if the drill chuck guard
is closed.
Checked by (signature):
Translation of original instructions
OK
DH40G | DH40GP
EN
57
Werbung
Inhaltsverzeichnis
