Authorized Persons - Optimum Optidrill B 24H Betriebsanleitung

1.5.2

Authorized persons

WARNING!
Inappropriate operation and maintenance of the drilling machine constitutes a danger for
the personnel, objects and the environment.
Only authorized personnel may operate the drilling machine !
Authorized operating and maintenance personnel are specialists instructed and trained by the
operator company and the manufacturer.
Obligations of the operating company
train the personnel,

instruct the personnel in regular intervals (at least once a year) on

- all safety regulations relevant to the machine,
- its operation and
- generally accepted engineering standards.
check the personnel's knowledge level,

document the training/instruction,

have attendance at the training/instruction confirmed by signature and

check whether the personnel is working in a safety and risk-conscious manner and follo-

wing the operating instructions.
define and document the inspection deadlines for the machine in accordance with § 3 of the

Factory Safety Act and perform an operational risk analysis in accordance with § 6 of the
Work Safety Act.
Obligations of the operator
have obtained a training regarding the handling of the drilling machine,

know the function and mode of action,

before taking the machine in operation

- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
Additional requirements apply for work on the following machine components:
Electrical parts or operating agents: shall only be performed by an electrician or under the

guidance and supervision of an electrician.
Before starting work on electrical parts or operating agents, the following actions must be
taken in the order given:
- disconnect all poles
- secure against restarting
- check that there is no voltage
Safety
Version 2.2.6 - 2020-07-21 Translation of the original instructions
B24H | B24HV | B28H | B28HV GB
83