Authorized Persons - Optimum OPTIdrill B 40GSP Betriebsanleitung

Electrical specialist
Due to his professional training, knowledge and experience as well as his knowledge of respec-
tive standards and regulations the electrical specialist is able to perform works on the electrical
system and to recognise and avoid any possible dangers himself.
The electrical specialist is specially trained for the working environment in which he is working
and knows the relevant standards and regulations.
Specialist staff
Due to their professional training, knowledge and experience as well as their knowledge of rele-
vant regulations the specialist staff is able to perform the assigned tasks and to recognise and
avoid any possible dangers themselves.
Instructed persons
Instructed persons were instructed by the operating company about the assigned tasks and any
possible risks in case of improper behaviour.
1.6.2

Authorized persons

WARNING!
Inappropriate operation and maintenance of the geared drill constitutes a danger for the
staff, objects and the environment.
Only authorized staff may operate the geared drill!
Persons authorized to operate and maintain should be trained technical staff and instructed by
the ones who are working for the operating company and for the manufacturer.
The operating company must

train the staff,

instruct the staff in regular intervals (at least once a year) on
- all safety standards that apply to the machine,
- the operation,
- accredited technical guidelines,

check staff's state of knowledge,

document the trainings/instructions,

require staff to confirm participation in training/instructions by means of a signature,

check whether the staff is working safety- and risk-conscious and observe the operating
instructions.
The operator must

have obtained a training regarding the handling of the geared drill,

know the function and mode of action,

before taking the machine in operation
- have read and understood the operating manual,
- be familiar with all safety devices and instructions.
For work on the following parts there are additional requirements:

Electric components or operating materials: Must only be performed by a qualified electri-
cian or person working under the instructions and supervision of a qualified electrician.
Before carrying out work on electrical components or operating units, the following measures
must be taken, in the order given.

Disconnect all poles.

Secure against switching on.

Check if the machine is zero potential.
Safety
Version 2.1.2 - 2021-09-22 Translation of original instruction
Obligations of the
operating
company
Obligations of the
operator
Additional
requirements
regarding the
qualification
B40 GSP EN
61