Qualification Of Personnel; Target Group - Optimum OPTIdrill DH 40G Betriebsanleitung

Always disconnect the geared drill when cleaning or maintenance work is being carried out.
WARNING!
The geared drill may only be operated with functional safety devices.
Disconnect the geared drill immediately, whenever you detect a failure in the safety
devices or when they are not fitted!
All additional devices installed by the operator must be equipped with the stipulated
safety devices.
This is your responsibility being the operating company!

Safety devices on page 55
1.6

Qualification of personnel

1.6.1

Target group

This manual is addressed to
the operating companies,

the operators,

the maintenance personnel.

Therefore, the warning notes refer to both, operation and maintenance personnel of the geared
drill.
Determine clearly and explicitly who will be responsible for the different activities on the
machine (operation, maintenance and repair).
Unclear responsibilities constitute a safety risk!
Always lock the main switch after switching off the geared drill. This will prevent it from being
used by unauthorized persons.
INFORMATION
Unclear responsibilities constitute a safety risk!
The qualifications of the personnel for the different tasks are mentioned below:
Operator
The operator has been instructed by the operating company regarding the assigned tasks and
possible risks in case of improper behaviour. Any tasks which need to be performed beyond the
operation in standard mode must only be performed by the operator, if so indicated in these
instructions and if the operator has been expressively commissioned by the operating com-
pany.
Qualified electrician
With professional training, knowledge and experience as well as knowledge of respective
standards and regulations, qualified electricians are able to perform work on the electrical sys-
tem and recognise and avoid any possible dangers.
Qualified electricians have been specially trained for the working environment, in which they are
working and know the relevant standards and regulations.
Qualified personnel
Due to their professional training, knowledge and experience as well as knowledge of relevant
regulations, qualified personnel are able to perform the assigned tasks and to independently
recognise and avoid any possible dangers.
Safety
Version 1.0.1 - 2020-11-24 Translation of original instructions
DH40G | DH40GP EN
53