Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ATTENTION!
Tighten the fixing screws of the geared drill only as much that it is safely fixed and
cannot break away or tilt over.
If the fixing screws are too tight in particular in connection with an uneven substructure it may
result in a broken stand of the machine.
3.8
Cleaning
Corrosion Protection
For the transport and the storage a corrosion protection is applied. Remove the anti-corrosive
agent from the machine before first commissioning. We recommend you use paraffin for this
purpose. Do not use aggressive solvents.
EN
DH40G | DH40GP
66
Translation of original instructions
Version 1.0.1 - 2020-11-24
Werbung
Inhaltsverzeichnis
