INFORMATION
Make sure that the direction of rotation of the drive motor is correct. When turning on, the drill
spindle must turn clockwise. If necessary, exchange two phase connections. The guarantee will
become null and void if the machine is connected incorrectly.
On machines equipped with a three-phase plug and phase inverter, change the phase
sequence on the three-phase plug.
3.11.1 Warming up the machine
ATTENTION!
If the geared drill and in particular the drilling spindle is immediately operated at
maximum load when it is cold it may result in damages.
EN
DH40G | DH40GP
68
Translation of original instructions
Version 1.0.1 - 2020-11-24