Reely Mini Hawk Bedienungsanleitung Seite 55

Attach the two tension springs (6) as shown in the upper
picture in Figure 4.
Make sure that the connection cable of the el-
evator servo (7) does not impair the function of
the springs and that it cannot be damaged.
Connect the elevator servo connector (8) to the supply ca-
ble connector (9). When connecting, ensure that the plug
connectors are correctly aligned.
The cables must be connected as follows:
• White and orange
• Red and red
• Black and brown
The connector is to be stowed in the tail of the fuselage
(see following section).
Figure 4
55