Mounting The Tailplane - Reely Mini Hawk Bedienungsanleitung

b) Mounting the tailplane
The tailplane of the model aircraft can be folded up using a
remote control command to enable vertical landing.
For this reason, it is essential to ensure that the locking
mechanism works smoothly when installing the tailplane.
Place the tailplane (1) on the tail of the fuselage as shown
in the upper picture in Figure 3.
Push the release lever (2) into the tail of the fuselage so
that the locking pin (3) can easily reach into the hole in the
tailplane bracket (4).
Then carefully screw the tailplane tight to the fuselage with
a 2.6 x 10 mm screw (5). Do not apply too much force to
avoid damaging the screw or the screw socket.
Then check whether the tailplane lock can be opened and
closed smoothly. To do this, simply push the release lever
carefully into the fuselage.
Figure 3
54