Stiga 9L3BL Bedienungsanleitung Seite 109

Problem
Secondary area not
completely mowed
On the display appears
"No Signal"
On the display appears
"Out of border"
Cause
Incorrect
programming
The perimeter wire
is not connected
correctly (broken
cable, no electrical
connection, etc.)
Too much slope
Perimeter wire laid
incorrectly
Perimeter wire mar-
king the boundary
of the inside areas
(fl owerbeds, bushes,
etc.) laid in an anti-
clockwise direction.
Overheated power
supply unit
Incorrect wheel
transmission
51
Remedies
Correctly program the secondary area
(see "Programming Mode")
Check the functioning of the electrical power
supply, the correct connection of the power
supply-transmitter unit and that of the charging
station (see "Installation of charging station and
power supply-transmitter unit")
Delimit the area with too much slope (see
"Planning of plant installation").
Check that the wire has been installed
correctly (e.g. too deep, next to metallic
objects, distance between the wire marking
the two elements less than 70 cm, etc.) (see
"Planning of Plant Installation")
Reposition the perimeter wire correctly
(anti-clockwise direction) (see "Installation of
perimeter wire")
Adopt the appropriate measures to reduce
the temperature of the power supply unit
(ventilate or modify the installation area, etc.)
(see "Planning of plant installation")
Check and, if necessary,
correctly fasten the wheels
EN
User's manual