Stiga 9L3BL Bedienungsanleitung Seite 100

1. Press the ON key (A).
2. Enter the password (if prompted) (See "Password Entry").
3. The "PAUSE" function appears on the display.
EN
4. Enter the programming menu and select "WORK MODE."
Select "CLOSED AREA" and the words "CLOSED AREA
– 60 Min" (default value) will appear on the display.
5. Press either the "+" or "-" key to set the minutes.
6. Press "Enter" to confi rm.
7. Press the "Start/Pause" key (B) to exit the programming mode and then restart the robot.
After the set time, the robot safely stops next to the perimeter wire.
8. Restore the normal functioning of the robot as described in chapter "INITITAL START-UP
– AUTOMATIC MODE.".
User's manual
30
42
PAUSE
CLOSED AREA
60 Min
59
58
57