RECOMMENDATIONS FOR REPLACING PARTS
Replace and repair any parts according to the manufacturer's instructions, or
contact the service centre if these operations are not included in the manual.
Replace the batteries at an authorised service centre.
1. Stop the robot safely (see "Robot Safety Stop").
Use protective gloves to prevent injury.
2. Turn the robot over and position it so as
not to ruin the covering hood.
3. Unscrew the screws (B) to remove the
blade (A).
4. Insert a new blade and fasten the screws.
5. Turn the robot back over to its operating
position.
PARTS REPLACEMENT
BATTERY REPLACEMENT
BLADE REPLACEMENT
55
blade (A)
EN
screws (B)
User's manual