Stiga 9L3BL Bedienungsanleitung Seite 94

WORK SCHEDULE 1: Function for setting the fi rst time
of the robot's working day. The cursor automatically
positions itself in the area under the fi rst time (e.g.
10:00am to 1:00pm). Set the time for the start and end
of the work. Setting the time at "00:00 – 00:00" means
that the robot will not work during the fi rst working time.
If the robot emits a beep and resets the time when this is
entered, it means there is an inconsistency with the time
entered or with the second working time.
EN
WORK SCHEDULE 2: Function for setting the second
time of the robot's working day.
If it is necessary to set secondary areas, then it is preferable
to program both working times in order to increase the
mowing frequency of the area.
Approximately 4.0 hours is needed to fully charge the
battery. Therefore, it is recommended to leave an interval
of 4 hours between working time 1 and working time 2.
The setting of the time is essential for the robot's proper functioning. Many parameters
infl uence the setting of the working time, such as the secondary areas, number of batteries,
complexity of the lawn, type of grass, etc. Generally, the working hours must be increased
slightly when mowing gardens with secondary areas, with lots of obstacles and complicated
areas. Below is a table with the indicative times for confi guring the robot on fi rst use.
NB. Set all the weekdays at "1" – "Work Days."
M² (sq ft)
0400
0800
1200
2000
3000
4000
5000
6000
User's manual
)
(4304
(8608)
(12912)
(21520)
(32280)
(43040)
(53800)
(64560)
Time 1
10:00 - 11:30
10:00 - 13:00
10:00 - 14:00
10:00 - 13:00
09:00 - 13:00
08:00 –13:00
07:00 –13:00
06:00 –13:00
36
WORK SCHEDULE 1
00 : 00 : 00 : 00
01
02
03
07
Time 2
17:00 - 20:00
17:00 - 21:00
17:00 - 22:30
17:00 - 23:00
17:00 - 23:59