Setting The Stirring Speed; Heating With Temperature Sensor; Adjusting The Set Temperatures - Heidolph MR Hei-End Betriebsanleitung

7

Setting the stirring speed

Set the desired speed with the speed control knob (B). The set speed is shown in the
bottom line of the display (C). Depending on how fast the speed-regulating switch is
turned, the set value changes slowly or fast.
The stirrer will start and automatically maintain this speed.
Note:
When lowering the speed, it will initially go down to a minimum speed of
30 rpm. Turn the knob to the left again to disable the stirring function.
8

Heating with temperature sensor

The temperature of the heated medium is controlled with the assistance of the temperature
sensor in this mode. The MR Hei-End automatically switches to this mode when a
temperature sensor is connected.
8.1

Adjusting the set temperatures

Press the Select button (F) briefly to switch the display to Set mode.
A cursor appears in front of "Set Probe". Use the arrow buttons (D) to set the desired
temperature (0°C – 250°C). The selected value is entered automatically.
33
E