Setting The Speed - Heidolph Hei-TORQUE series Betriebsanleitung

Operation

Setting the speed


The overhead stirrer rotates clockwise. The speed range varies from
10 rpm - 2,000 rpm (For further details, see the chapter "Technical data".)
We recommend a maximum speed between 500 rpm and 2,000
rpm, depending on the type of impeller used (see the chapter
"Attachments, Technical data").
Hei-TORQUE Value: setting and adjusting the speed
➜ Turn the control knob clockwise.
✓ to increase the speed.
✓ The current speed setting is displayed
under "set rotation speed" on the
display.
➜ Turn the control knob
counterclockwise.
✓ to decrease the speed.
Turn the control knob clockwise or counterclockwise to adjust speed at any time.
Hei-TORQUE Precision: setting and adjusting the speed
✓ You are currently in the main menu.
✓ The cursor is on the left beside
"Speed".
✓ "Speed" is displayed in orange.
➜ Turn the control knob clockwise
or counterclockwise to increase or
decrease the speed.
In the main menu, turn the control knob clockwise/counterclockwise to adjust the speed
while the device is running.
The speed cannot be adjusted if a profile was activated via
Favorites
Increase rotation
Speed
.
26
Decrease rotation
2000