Operation; Switching The Instrument On; Setting The Stirring Speed - Heidolph MR Hei-Standard Betriebsanleitung

7

Switching the instrument on

Caution:
Stirring will begin immediately after the instrument is switched on in
accordance with the setting of control knob (B).
Agitator will begin turning immediately!
Danger of splashing.
Before switching the unit on, turn control knobs (C) and (B) fully to the
left.
Turn on the instrument's power
using the rocker switch (A) on the
right side of the housing. The
green Power LED (G) on the front
panel will light.
8

Setting the stirring speed

OPERATION

Set the desired speed with the control knob (B)
according to the scale.
The motor will start when the speed is set to 100
rpm or higher.
27
E