Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
24
Tip
Call the special help for the sensor database via Help (Group Help) in the
Ribbon. There are numerous examples here for various sensor types and
detailed explanations for the individual input fields, as well as the procedure
for setting up own sensor entries.
5.6 Configure channel via sensor database
Drag the sensor from the component window Sensor database to the
channel (line in the channel list) it is connected to.
The channel is then configured, in general you only need to perform a zero
balance (see Section 5.7).
Manually modifying/calibrating the sensor scaling
If you do not want to store the sensor scaling permanently in the sensor
database, but recalibrate it for each application case, just enter the sensor
initially with the "general" values. Assign it to the channel it is connected to in
the normal way. Then double‐click in the column Amplifier setting on the
channel and, in the next dialog, click on the right side of the Settings line,
then the arrow facing down. This opens the Sensor adaptation dialog
(Fig. 5.12).
Fig. 5.12:
Sensor adaptation dialog
HBM
QuantumX driver for CANape
A3325-1.0 en/de
Werbung
Inhaltsverzeichnis
