Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
10
Important
Installation of the CANape driver enables the installation of an NTP time
server (Full installation). This installation is only necessary during the initial
installation of the CANape driver. You can suppress the re‐installation of the
NTP time server during an update.
NTP time server: The NTP server from Meinberg must be installed for the
synchronization of all devices participating in the measurement.
Synchronization of the time server with an NTP time server on the Internet is
not necessary and is also not implemented by the automatic installation.
You can edit the configuration of the NTP time server at a later date, see also
http://www.meinberg.de
Select the components to be installed and follow the instructions of the setup
program. Before installation, a summary of all components to be installed is
displayed, confirm this selection with Install.
HBM
and Section 5.11 on Page 27.
QuantumX driver for CANape
A3325-1.0 en/de
Werbung
Inhaltsverzeichnis
