Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance And Storage - Stiga VILLA 320 Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 53
EN
a. To remove sticks and rubbish or when the dis-
charge has become clogged.
b. To check, clean or service the machine.
c. To check whether damage has occurred and
to carry out any repairs before starting and us-
ing the machine again after a collision with a
foreign object.
d. To check the machine if it begins to vibrate
excessively. (Check immediately).
• Disengage the drive to accessories during trans-
port or when the machine is not in use.
• Shut off the engine and disconnect the drive to
the accessories:
a. Before filling with petrol.
b. Before removing the grass collector.
c. Before adjusting the height setting, assuming
this cannot be done from the driver's position.
• Reduce the throttle when the engine is to be
stopped
• Take care with multiple blade decks as one ro-
tating blade can cause other blades to rotate.
• The machine, equipped with original accesso-
ries, must not be driven in any direction on
slopes with a gradient greater than 10º.
• The cutting deck's original blade(s) may not be
replaced with non-original devices intended for
e.g. moss scarification. If such devices are used,
the guarantee will cease to be valid. There is
also a risk of serious injury or damage to people
or property.
• Take care when unloading and loading the ma-
chine onto a trailer or lorry.
• During transport on lorry or trailer the parking
break must always be activated.
• During transport on lorry or trailer the clutch re-
lease lever must be pushed in. See 5.4.10.
• During transport always make sure the machine
is secured to the trailer or lorry according to lo-
cal laws and regulations.

2.4 MAINTENANCE AND STORAGE

• Tighten all nuts and screws so that the machine
is in safe working condition.
• At regular intervals check that the cutting
deck's blade screw(s) are properly tightened.
• Regularly check the operation of the brakes. It
is important to maintain and repair the brakes if
necessary.
• Never store the machine with petrol in the tank
in buildings where the fumes can come into
contact with open flames or sparks.
• Allow the engine to cool before placing the ma-
chine in a store.
• Check frequently whether there is any wear or
damage to the grass collector.
• For the sake of safety, replace worn or damaged
68
ENGLISH
parts.
• Always use genuine spare parts. Non-genuine
spare parts can entail a risk of injury, even if
they fit the machine.
• Replace damaged warning and instruction
stickers.
• If there is no mechanical lock for the transport
position, the cutting deck must be lowered
when parked, stored or when the machine is left
unsupervised.
• If the petrol tank is to be emptied, this must take
place outdoors.
• Store the machine so that children cannot get to
it.
• The battery contains acid. In the event of me-
chanical damage or overcharging, acid can leak
out.
• Never overcharge the battery. Overcharging can
cause the battery to explode, throwing the acid
in all directions.
• If acid comes into contact with the eyes or skin,
this can cause serious injuries. If any part of the
body has come into contact with acid, rinse im-
mediately with copious amounts of water and
seek medical assistance as soon as possible.
• Fumes from acid that are inhaled cause damage
to mucous membranes and other internal or-
gans. Seek medical assistance if acid fumes
have been inhaled.
• Acid causes serious damage to tools, clothes
and other material. Rinse away spilled acid im-
mediately with water.
Original instructions for use

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Villa 520

Inhaltsverzeichnis