9.6 Dimensions Eps - Bosch EPS 807 Originalbetriebsanleitung

en 46 | EPS 807 / 815 | Technical Data
9.6 Dimensions EPS 807/815
a
b
200mm 200mm
1 Maximum installation space taken up by measuring cell carrier of
KMA 802/822 or measuring-glas carier of MGT 812/824
2 Maximum installation space taken up by monitor and keyboard of
KMA 802 or stroge and rev counters of MGT 812/824
3 Maximum installation space taken up by PC housing of KMA 802
4 Power connection
5 Water connection (Coolant connection)
a) Supply connection G½" A ISO 228- 1
b) Return-line connection G½" A ISO 228- 1
!
The operator must provide a pressure reducer (set
to 250 kPa), a safety filter and a shut-off valve in the
coolant supply.
!
The coolant temperature must not exceed 17 de-
grees. If the coolant temperature is higher than this,
the operator must provide a suitable cooling device.
!
The coolant must be discharged via an oil separator into
the waste water lead. No shut-off valves must be used.
|
1 689 979 672 2012-06-26
1 2
458753 R
4
2306 mm
2937 mm
3
4
5
673 mm
310 mm
Robert Bosch GmbH