Werbung
HOW TO USE THE PARTS MANUAL
GB
ITEM NUMBER
Each part which is identified in the illustrations has an item number. Parts which do not have an item number
may not be readily identified in the illustration but are usually closely associated with the immediately adjacent
part.
ASSEMBLIES
A complete assembly, e.g. a wheel motor or hydraulic motor or roll assembly, is listed as a complete item with
subsequent individual components listed separately.
The assembly is listed under it's part number with component parts being listed offset to the right, e.g:-
ITEM
1
2
3
4
5
6
7
*
It may not be possible to illustrate every item. With certain items purchased from outside suppliers some
component parts may not be available from Ransomes and may need to be specially ordered from the
supplier e.g. Volvo hydraulic motor components.
QUANTITIES
Quantities shown are for one assembly or sub-assembly.
USING THE PARTS LIST
Determine the function and application of the part required. Turn to the main index page and select the
appropriate section. Locate the part on the illustration and parts list and read off the quantity from the
appropriate MODEL column.
NUMERICAL INDEX
This is a summary of all part numbers used in the manual arranged in numerical sequence and showing the
page and item number under which the parts appear.
ORDERING OF SPARE PARTS
When ordering replacement parts, it is most important to quote the SERIAL NUMBER of the machine, PART
NUMBER, DESCRIPTION and QUANTITY required.
Any arbitrary modifications carried out on this machine may relieve the manufacturer of liability for
any resulting damage or injury.
ABBREVIATIONS
N/A
Not Available
AR
As Required
28
RANSOMES
DESCRIPTION
PART NO.
LMSD798
Roll Assy.
MBB4490
• Tube
LMSD926
• End Cap Assy.
MBB6851
• • End Cap
H009116
• • Bearing
MBB2356
• Seal Housing
A224016
• Seal
A122192
Screw
QTY
REMARKS
1
ALL MACHINES
1
2
1
1
1
2
2
Werbung
Kapitel
