Werbung
GB
This safety symbol indicates important safety
messages in this manual. When you see this
symbol, be alert to the possibility of injury, carefully
read the message that follows, and inform other
operators.
NL
Door dit veiligheidssymbool worden belangrijke
veiligheidsmeldingen in dit handboek aangegeven.
Als u dit symbool ziet, wees u dan bewust van
fysieke risico's. Altijd de bijbehorende instructies
goed lezen en ook andere bedieners op de hoogte
brengen.
F
Ce symbole de sécurité indique les messages de
sécurité importants figurant dans ce manuel. Lorsque
vous voyez ce symbole, soyez conscient des risques
de blessures, lisez attentivement le message qui suit
et informez tous les autres opérateurs.
GB-F-NL-4
SAFETY INSTRUCTIONS
NOTE: Refer also to safety instructions in the
power unit operating instruction book.
OPERATING INSTRUCTIONS
Ensure that the instructions in this book are read and
fully understood.
No person should be allowed to operate these units
unless they are fully acquainted with all the controls and
the safety procedures.
BLOCKED CUTTING CYLINDERS
Release blockages with care. Keep all parts of the body
away from the cutting edges Beware of energy in the
drive system which can cause rotation when the blockage
is released.
Keep other people away from the cutting units, as
rotation of one cylinder can cause the others to rotate.
ADJUSTMENTS, LUBRICATION AND
MAINTENANCE
Read all the appropriate servicing instructions.
only replacement parts supplied by the original
manufacturer.
When adjusting the cutting cylinders take care not to get
hands and feet trapped when rotating cylinders Make
sure that other people are not touching any cutting unit,
as rotation of one cylinder may cause the others to
rotate.
GB
Use
Werbung
Kapitel
