Yamaha RX-V4600 Bedienungsanleitung Seite 91

■ MANUAL SETUP
1 BASIC MENU
Item
A)SPEAKER SET
B)SP DISTANCE
C)SP LEVEL
D)TEST TONE
E)THX SET
Sub-items
FRONT;;;;SMALL
CENTER;;;;;SML
SURR LR;;;;SML
SURR B;;;SMLx2
PRESENCE;;NONE
BASS OUT;;SWFR
CrossOver;80Hz
SWFR PHASE;NRM
UNIT;;;;meters
FRONT L;;3.00m
FRONT R;;3.00m
CENTER;;;3.00m
SURR L;;;3.00m
SURR R;;;3.00m
SB L;;;;;3.00m
SB R;;;;;3.00m
SWFR;;;;;3.00m
PRES L;;;3.00m
PRES R;;;3.00m
UNIT;;;;;;feet
FRONT L;;10.00ft
FRONT R;;10.00ft
CENTER;;;10.00ft
SURR L;;;10.00ft
SURR R;;;10.00ft
SB L;;;;;10.00ft
SB R;;;;;10.00ft
SWFR;;;;;10.00ft
PRES L;;;10.00ft
PRES R;;;10.00ft
FL-----||-----
C-----||-----
FR-----||-----
SL-----||-----
SB.L----||-----
SB.R----||-----
SR-----||-----
SWFR-----||-----
PR.R----||-----
PR.L----||-----
TEST TONE;;OFF
TEST TONE;;;ON
SB Dis: <0.3m
SB Dis: 0.3-1.2m
SB Dis: >1.2m
FRONT PANEL DISPLAY MENUS
Features
• Selects the output mode suitable for each speaker, the
speakers for low-frequency signal output, and the
cross over frequency.
• Corresponds to Speaker Set in the GUI menu
(see page 63).
• Adjusts the delay time of each speaker.
• Corresponds to Speaker Distance in the GUI menu
(see page 65).
• Set the unit to "meters" or "feet" to input speaker
distances in meters or in feet.
• Adjusts the output level of each speaker.
• Corresponds to Speaker Level in the GUI menu
(see page 66).
• Outputs a test tone to calibrate your speaker levels.
• Corresponds to Test Tone in the GUI menu
(see page 63).
• Adjusts the THX settings.
• Corresponds to THX Set in the GUI menu
(see page 66).
89