Connections; Before Connecting Components - Yamaha RX-V4600 Bedienungsanleitung

CONNECTIONS

Before connecting components

CAUTION
Do not connect this unit or other components to the mains
power until all connections between components are
complete.
■ Cable indications
For analog signals
left analog cables
right analog cables
For digital signals
optical cables
coaxial cables
For video signals
video cables
S-video cables
■ Analog jacks
You can input analog signals from audio components by
connecting audio pin cables to the analog jacks on this
unit. Connect red plugs to the right jacks and white plugs
to the left jacks.
■ Digital jacks
This unit has digital jacks for direct transmission of digital
signals through either coaxial or fiber optic cables. You
can use the digital jacks to input PCM, Dolby Digital and
DTS bitstreams. When you connect components to both
the COAXIAL and OPTICAL jacks, priority is given to
signals input at the COAXIAL jack. All digital input jacks
are compatible with 96-kHz sampling digital signals.
Note
This unit handles digital and analog signals independently. Thus
audio signals input at the analog jacks are only output at the
analog OUT (REC) jacks. Likewise audio signals input at the
digital (OPTICAL or COAXIAL) jacks are only output at the
DIGITAL OUTPUT jacks.
18
CONNECTIONS
■ Video jacks
This unit has three types of video jacks. Connection
depends on the availability of input jacks on your monitor.
The signals input at the S VIDEO jacks on this unit are
automatically converted for output at the VIDEO jacks.
When
"
input at the VIDEO jacks can be output at the S VIDEO
and COMPONENT VIDEO jacks. Likewise, signals input
at the S VIDEO jacks can also be output at the
COMPONENT VIDEO jacks.
L
R
VIDEO jack
For conventional composite video signals.
O
S VIDEO jack
C
For S-video signals, separated into luminance (Y) and
color (C) video signals to achieve high-quality color
reproduction.
V
COMPONENT VIDEO jacks
S
For component signals, separated into luminance (Y) and
V
color difference (P
V
picture reproduction.
V
Signal flow inside this unit
COMPONENT
VIDEO
S VIDEO
VIDEO
Note
When signals are input at both the S VIDEO and VIDEO jacks,
signals input at the S VIDEO jack have priority.
Video Conv. is set to On
" "
S VIDEO
VIDEO
, P ) to provide the best quality in
B R
Input
Only when "Video Conv." is set to "On"
(see page 67)
(see page 67), signals
"
COMPONENT VIDEO
P P Y
R B
Output
(MONITOR OUT)