Warning Message - Yamaha RX-V4600 Bedienungsanleitung

AUTO SETUP
After auto setup
The following warning messages are displayed after analysis is complete to inform you of possible problems. We
recommend that you check the contents of each message, then select Retry to try the auto setup procedure again.

Warning message

W1:Out of Phase
W2:Over Distance
W3:Level Error
W4:SP Mismatch
32
Cause
Speaker polarity is incorrect. This message may
appear depending on the speakers even when
they are connected correctly.
The distance between the speaker and the
listening position is over 24 m.
The difference in volume level between the
speakers is excessive. (No level correction is
made.)
The speaker settings differ from the
measurement results of wiring (only occurs
when the wiring measurement procedure is
skipped).
Remedy
• Check the speaker connections.
• Bring the speaker closer to the listening position.
• Readjust the speaker installation.
• Check the speaker connections.
• Use speakers of similar quality.
• Adjust the output volume of the subwoofer.
• Check the speaker connections.