Herunterladen Inhalt Inhalt Diese Seite drucken

Automatic Shut-Off - Gastroback DESIGN TEE AUTOMAT ADVANCED PLUS Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für DESIGN TEE AUTOMAT ADVANCED PLUS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

After the keep warm function is cancelled (manually or automatically), the appliance
switches off completely. The operating elements and keep warm indicator ("KEEP
WARM") get dark (see: 'Automatic Shut-Off').
NOTE
When removing the kettle from the power base, before reaching the set tempe-
rature, the appliance cancels the running program at once and returns to standby
mode. However, the keep warm function can be cancelled prematurely only by
pressing the start/stop button, you used for starting the program (TEA or WATER).
Otherwise, the keep warm function keeps running until the maximum keep warm
time is reached.
While the keep warm function is running, removing the kettle from the power base
does not terminate this function and the keep warm time keeps running as usual.
When placing the kettle back onto the power base, the water is heated to the keep
warm temperature.
If you do not wish to keep the tea/water warm any longer or the filling level drop-
ped below the minimum filling level after pouring (approx. 250ml; 1cm or half an
inch above the tip of the temperature probe), press the illuminated start/stop button
(TEA or WATER). The appliance returns to standby mode at once.
IMPORTANT - For saving energy, do not leave the keep warm function running
uselessly. Cancel the running program (press the illuminated start/stop button TEA
or WATER), if you do not need this function any longer. Additionally, you should
not leave the appliance connected to the power supply, uselessly. Unplug the
appliance, when it is not in use.

AUTOMATIC SHUT-OFF

When in standby mode (display is illuminated, no program is running) and without
any entries for more than 5 minutes, or after the maximum keep warm time is rea-
ched, the appliance switches automatically to energy saving mode (all buttons and
the display get dark). However, you should not leave the appliance operate or even
being connected to the power supply uselessly. To avoid excessive energy loss, if
the appliance is not in use, please cancel any operating cycle by pressing the illu-
minated start/stop button (TEA or WATER). Then unplug the appliance.
EN
85

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis