Properties Of Your New Tea Maker - Gastroback DESIGN TEE AUTOMAT ADVANCED PLUS Bedienungsanleitung

PROPERTIES OF YOUR NEW TEA MAKER

The Design Tea Maker Advanced Plus is intended for heating drinking water to a
selectable temperature in the range from 50°C to the boiling temperature (100°C).
The motor driven cantilever can immerse the provided tea infuser automatically into
the water and lift it out after the selected steeping time ran through. During the stee-
ping time, a constant temperature is kept within the kettle. Additionally, via the keep
warm function, the selected temperature can be maintained for a pre-selected keep
warm time (see: 'Keep Warm Function').
• The lid ring is designed for keeping the kettle closed securely, holding the filter
system or plain lid stably, even during pouring. When the filter system is not in
use, close the kettle via the lid.
• During operation, various acoustic signals are given. The display indicates the
actual water temperature and the currently running program (see: 'Display and
Acoustic Signals').
• During operation, you cannot enter any changes. However, you can make the
set values flash on the display for approx. 5 seconds via pressing the TEMP/
TIME button. If you wish to make new entries, you need to cancel operation of
any running program and start a new run.
• An additional program for hot water („WATER") can be used via pressing the
WATER button after setting the desired temperature (see: 'Recommended Usage
of the Programs'). For this, the complete temperature range of the appliance is
available.
• Optimum steeping temperature values and steeping time settings for several
types of tea are programmed in 5 pre-defined tea programs (see: 'Recommen-
ded Usage of the Programs'). Additional space in memory is offered for 4 user-
defined programs.
• Via the advanced motor drive, the provided filter system can be lowered into
the water and lifted out automatically (see: 'Automatic Extraction'). For this, the
infuser cover of the filter system is assembled completely with magnet holder
and pusher. Due to the design of the magnet holder the kettle is closed perfectly
during steeping, keeping the flavours inside.
• After steeping or when reaching the correct water temperature, the appliance
starts the keep warm function automatically (see: 'Keep Warm Function'). You
can disable the keep warm function or adjust the maximum keep warm time
(see: 'Special Settings').
• Any operation may be cancelled at any time via pressing the illuminated start/
stop button TEA (when a pre-defined program or user-defined program is run-
ning) or WATER (when water is heated). You used this button for starting the
currently running program (see: 'Operation / Cancelling Operation').
EN
78