Automatic Extraction - Gastroback DESIGN TEE AUTOMAT ADVANCED PLUS Bedienungsanleitung

NOTE
Even after the automatic shut-off or when disconnecting the appliance from the
power supply, the user-defined values will be kept (see: 'Automatic Shut-Off').
Therefore, there is no reason for keeping the appliance live, when it is not in use.
IMPORTANT - When entering new values, any former settings will be lost, and
your new settings will be kept. Press the FAV./CUS. button for toggling between
the user-defined programs and pre-defined tea programs. The desired program is
selected via the selection buttons – or +.

AUTOMATIC EXTRACTION

For preparing tea, the provided filter system (tea infuser and infuser cover) should
be used always. The infuser cover is completely assembled with magnet holder and
pusher for automatic operation. When using any other filter system, automatic extrac-
tion is not possible. The magnet holder of the infuser cover fits perfectly into the lid
ring of the appliance, closing the kettle tightly. Therefore, the flavours of your tea are
kept. Via automatic brewing, the appliance can make your tea without any interventi-
on by the user. You do not need to pay attention to reaching the desired temperature
or keeping the correct steeping time. When the set temperature is reached within
the kettle, the cantilever of the appliance lowers the tea infuser automatically into the
water. Via the automatic steeping function (AUTO STEEP button is illuminated), the
tea infuser can be lifted up and lowered down several times for ensuring that the
ingredients in the tea infuser are mixed and moistened completely and thoroughly,
for getting the perfect extraction of flavours. Otherwise, the tea infuser stays within
the water up to the end of the steeping time.
IMPORTANT - When you wish to use the keep warm function, within 5 minutes
after the steeping process is finished (while"BASKET" is shown on the display)
remove the kettle from the power base shortly. Use this moment for replacing the
filter system with the lid. Thereafter, place the kettle back onto the power base
for keeping your tea warm. When the kettle is not moved within these 5 minutes,
the appliance shuts off completely and the display gets dark, cancelling the keep
warm function (see: 'Keep Warm Function').
IMPORTANT - You may activate or deactivate automatic steeping, before starting
any program via the TEA button. For this, simply press the AUTO STEEP button.
Automatic steeping is activated, when the AUTO STEEP button is illuminated. In this
case, the cantilever moves up and down several times during steeping for ensuring
an optimized extraction.
EN
83