Recommended Usage Of The Programs; Heating Water - Gastroback DESIGN TEE AUTOMAT ADVANCED PLUS Bedienungsanleitung

gram are shown on the display.
• When the appliance is idle (standby mode: no program running, no entries)
the appliance shuts off automatically and the display gets completely dark (see:
'Automatic Shut-Off').
• When an error occurs during operation or via your entries, in the lowest line of
the display an error message is issued ("E1" to "E4", see: 'Solving Problems /
Error Messages').

RECOMMENDED USAGE OF THE PROGRAMS

Each program is operated according to pre-programmed values. For selecting a pre-
defined tea program, use the selection buttons – or +. Via the FAV./CUS. button,
you can toggle to the user-defined programs (1 to 4) and back. Additionally, heat
clear water via the WATER button (with the cantilever staying in the upper position).
NOTE
While a program is running, no entries of new values are possible. For entering
new values, any running program must be cancelled first (see: 'Operation / Can-
celling Operation'). Nevertheless, pressing the TEMP/TIME button displays the
current settings (temperature, steeping time and selected program).

Heating Water

If you wish to heat clear water, you can select the desired temperature first within the
full range of possible temperature values (50°C to 100°C; 122°F to 212°F). The-
refore, this function can be used for manual brewing (immersing and taking out the
ingredients manually). We recommend to use the filter system even for this purpose.
With the filter system, you simply move the pusher manually down and up.
NOTE
Manual operation may be useful for finding out the optimum steeping time, when
testing a new tea blend. In standby mode (display is illuminated, no program run-
ning) with the desired temperature shown on the display, simply press the WATER
button. The kettle starts heating immediately. When the set temperature is reached,
with an acoustic signal, the appliance switches to the keep warm function (see:
'Keep Warm Function').
EN
81