Temperature Unit; Selecting The Language - Gastroback DESIGN TEE AUTOMAT ADVANCED PLUS Bedienungsanleitung

Function
Temperature
unit
Time format
5. Shortly press a selection button (+ or –) for selecting the desired value. The cur-
rently selected value is shown on the display or indicated via an arrow.
6. Press the FAV./CUS. button for confirming the selected value and returning to
the settings menu. Thereafter, you can adjust the next parameter or exit the set-
tings menu.
7. To exit the settings menu and return to standby mode, keep both selection but-
tons (+ and –) pressed for approx. 2 seconds. Alternatively, simply wait for
approx. 20 seconds without pressing any button.

SELECTING THE LANGUAGE

When the appliance has been delivered with the original settings, the language
of the display is English. Immediately after selecting another language, the display
switches to the new language.
1. Keep both selection buttons (+ and –) pressed for approx. 2 seconds for entering
the settings menu.. The first parameter "LANGUAGE" is shown on the display.
2. Press the FAV./CUS. button for selecting this parameter and displaying the first
possible value.
3. Repeatedly press a selection button until the desired language is shown.
4. Press the FAV./CUS. button for confirming your selection and returning to the
settings menu. The current menu item is shown in the selected language.
5. To exit the settings menu, keep both selection buttons (+ and –) pressed for
approx. 2 seconds. Alternatively, simply wait for approx. 20 seconds without
pressing any button. The appliance goes back to the standby mode.
Menu Item Possible Values
Celsius (°C) or Fahrenheit (°F).
°C/°F
12 hours format (12H) or 24 hours format (24H). NOTE: in 12
hours format (12H) any time from midnight ("12:00") to 11:59
12H/24H
(morning) is indicated via "AM". From high noon ("12:00") to
11:59 (at night) the label "PM" is shown.
EN
91