Care And Cleaning; Cleaning The Power Base - Gastroback DESIGN TEE AUTOMAT ADVANCED PLUS Bedienungsanleitung

CARE AND CLEANING

WARNING
of young children. Always switch OFF (the start/stop buttons TEA and WATER are
dark), unplug, and leave the appliance cool down, before cleaning the appliance.
To avoid risk of fire, and electric shock: Do not spill or pour any liquids on or in
the power base or power cord. Do not place or immerse the power base, kettle
or power cord in any liquids. Do not pour any liquids on the exterior of the
kettle. Especially, always keep the power socket at the power base and the power
connector in the bottom of the kettle completely dry and clean. Do not poke in the
power connectors of the power base and kettle or in the pillar, to avoid damage.
Do not attempt to disassemble the Infuser cover.
Glass can easily break, splinter, or crack. Always use special care, while handling the
kettle. Do not expose the kettle to extreme temperature variations and mechanical strain.
Do not use abrasive cleaning agents or aggressive liquids (e.g. bleach, solving
agents, insufficient descaling agents) for cleaning the appliance or any part of it,
to avoid damage to the surfaces and seals. Do not use any hard or sharp-edged
objects for cleaning (e.g. metal scoring pads, knives, scrapers). Do not use violence.
DO NOT clean the power base or kettle or any other part of the appliance in an
automatic dishwasher!
Depending on the water hardness and the usage, the interior of the kettle gets coa-
ted with grey or sand-coloured scale or brown stains of tea. Remove these stains
and descale the kettle in time (see: 'Descaling the Kettle'). However, do not use
any descaling agents not recommended in this booklet, to avoid damage to the
heating plate, temperature sensor, and seals of the kettle.
Depending on the usage, you should clean the kettle immediately after use, to avoid
the build-up of stubborn residues that could influence the flavour and taste of your
tea and/or water unpleasantly.

CLEANING THE POWER BASE

CAUTION
base completely dry. Do not spill any liquids onto the control panel or in the pillar
of the cantilever.
1. Cancel any running program (pressing the illuminated start/stop button TEA or
WATER). Remove the kettle from the power base and unplug the power base.
2. Wipe the power base and power cord with a slightly damp cloth, removing any
stains and splashes.
– Always ensure that all parts of the appliance are out of reach
– Always keep the power socket in the middle of the power
EN
113