Suzuki 1998 SQ 416 Handbuch Seite 14

8A-1-12 HOW TO USE THIS MANUAL
HOW TO READ SYSTEM CIRCUIT DIAGRAM
The circuit diagram of each system shows the electric circuit from the main fuse , fuse box or the ignition
switch (at the top in the diagram) to the ground (at the bottom) so that the circuit can be followed easily
when performing inspection and service work.
Fuse No.
This No. indicates the
installation position of each
fuse in the fuse box.
(Refer to item "HOW TO
READ POWER SUPPLY
DIAGRAM" in "HOW TO USE
THIS SECTION".)
Connector mark
This indicates that the
connector is identical.
This indicates the shield
wire.
Wire color
This indicates the wire color.
(Refer to item "WIRE COLOR
SYMBOLS" in "HOW TO USE
THIS SECTION".)
This describes the
symbols divided on the
circuit.
1 4-DOOR
2 2-DOOR
This indicates that the circuit
is continued to the same
symbol in the other page.
Variations by specifications are
identified by codes. For the details,
refer to the lower left of this page.
This inidcates continuity
between pages, i.e., to be
continued to the same
symbol in the other page.