Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch Start Line TCE 420 Instandsetzungsanleitung

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the
consequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Key word Probability of
occurrence
DANGER Immediate impending
danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death or severe injury
Death or severe injury
Minor injury
Symbols used | Start Line TCE 420 | 25
2.

General principles

It's necessary to read the warning and instructions in
this manual carefully before maintain the equipment, to
provide the important information in safe and operation
aspect.
Keep the manual properly for future reference.
DANGER
Cut off the power supply and air source
before do any repair and maintain. Exhaust
the rest air in equipment by step the pedal of
bead break cylinder repeatedly.
!
Can't modify equipment components without
permission.
!
Laypeople cannot do the maintenance and repair
operation.
!
If there is no regular maintenance on the machine,
operation and reliability of the machine will not
be guaranteed, the operator and people near the
machine are at risk.
!
It violates the safety standards to remove or damage
the safety device (safety valve and standard valve).
i
Due to the use of the spare parts from other
manufacturers to cause complaints, or remove/
damage the safety devices to cause the losses,
manufacturer is irresponsible.
!
Defective parts must be replaced by professionals
with original spare parts provided by with
manufacturer.
¶
Keep the workplace clean and tidy.
¶
Do not use compressed air to blow the dust on
equipment; minimize dust around as far as possible.
i
The pictures in this manual are from the original
design structure and maybe they are different from
the actual equipment.
i
This manual can provide the guide for the people
with mechanical and electrical skills base. Therefore,
the basic operation process like how to tightening
screws can be cancelled during the guide process.
Do not try to make the inexperienced people to
repair the equipment.
en
|
1 695 108 084 2016-11-15