Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch WBE 4200 Instandsetzungsanleitung

1.

Symbols used

1.1

In the documentation

1.1.1

Warning notices - Structure and meaning

Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indicate
the consequences of the hazard as well as preventive
action. Warning notices have the following structure:
Warning KEY WORD – Nature and source of hazard!
symbol Consequences of hazard in the event of
failure to observe action and information
given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observance:
Signal Probability of
word occurrence
DANGER Immediate
danger
impending
Possible
impending
danger
CAUTION dangerous
Possible
situation
1.1.2

Symbols in this documentation

Sym- Designation Explanation
bol
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible

result intermediate result.
Final result There is a visible final result on
"
completion of the instruction.
Robert Bosch GmbH
Severity of danger if
instructions not observed
Death severe
or injury
Death severe
or injury
Minor
injury
Symbols used | WBE 4200 | 35
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible!
1.2.1

Product information

Identification plate
Machine model, 10 digit identification code; Voltage
(V), Frequency(Hz), Installed power (kW); Amperage
(A), Max. working pressure (kPa), Class of protection
(IP); Year of manufacture; CE Marking; 14 Digit code
and machine model; Bar code.
Disposal
Dispose of used electrical and electronic
devices, including cables, accessories and
batteries, separately from household waste.
GOST Marking
¶
Certifies machine conformity for the
Russian market.
Direction of wheel rotation
Wheel must turn in direction indicated.
Power supply voltage
¶
Follow the indications given on the plate.
Balancing Start-Stop
¶
Located on the wheel protection indicates the
direction to activate/stop the flange rotation.
en
|
1 695 600 091 2012-11-16