AirSep VisionAire 5 Gebrauchsanweisung Für Patienten Seite 75

VisionAire™
2.0 Concentrator Components
Review the figures below and become familiar with the important parts
of your VisionAire Oxygen Concentrator.
2.1 Front of Concentrator
Oxygen Outlet
Flowmeter
Adjustment
Knob
Low Oxygen
Concentration
Indicator
(optional – mandated for
EU and specific countries)
®
AirSep Corporation
MN137-1 rev. D
Top Handle
Hour Meter
Side Handles
Circuit Breaker
Reset Button
ON/OFF (I/0)
Power Switch
Operating
Instructions
Label
Caster(s)
Figure 1
Specification
Figure 1a
EN EN
Ø
Top and Side Handles:
Ø
On/Off (I/0) Power Switch:
Ø
Oxygen Outlet
Ø
Circuit Breaker Reset Button:
Ø
Flowmeter Adjustment Knob:
Ø
Low Oxygen Concentration Indicator (optional – mandated for EU
and specific countries)
Ø
Hour Meter:
Ø
Operating Instructions Label:
Ø
Casters:
Ø
Specification Label:
Label
EN-9 EN-10
Enables convenience in carrying the unit.
o
Starts and stops the operation of the unit.
o
Provides connection for a humidifier (if required) or cannula.
o
Resets the unit after electrical overload shutdown
o
Controls the oxygen flow rate in liters per minute (LPM).
o
When equipped with an Oxygen Monitor – a warning LED
o
(amber) is activated on the front panel (see Section 2.6 ' Safety
Features' for details)
Records the concentrator's cumulative hours of operation.
o
Directs usage of the unit.
o
Four casters enable unit to be easily moved, as needed.
o
Displays electrical specifications and serial number.
o
VisionAire™
®
AirSep Corporation
MN137-1 rev. D