Werbung
A
IV. Maintenance
and Storage
Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
Never store the equipment with petrol in the tank inside
a building where fumes may reach an open flame or
spark.
Allow the engine to cool before storing in any enclo-
sure.
To reduce the fire hazard, keep the engine, silencer,
battery compartment
and petrol storage area free of
grass, leaves, or excessive grease.
Check the grass catcher frequently for wear or deterio-
ration.
Replace worn or damaged parts for safety.
If the fuel tank has to be drained, this should be done
outdoors.
On multi-bladed
machines,
take cam as rotating one
blade can cause other blades to rotate.
When machine
is to be parked, stored or left unat-
tended, lower the cutting
means unless a positive
mechanical
lock is used.
CAUTION: Always disconnect spark plug wire and
place wire where it cannot contact spark plug in
order to prevent accidental starting when setting
up, transporting,
adjusting or making repairs.
4
Werbung
